Peristaltic Carreau-Yasuda nanofluid flow and mixed heat transfer analysis in an asymmetric vertical and tapered wavy wall channel
In this study, two-phase asymmetric peristaltic Carreau-Yasuda nanofluid flow in a vertical and tapered wavy channel is demonstrated and the mixed heat transfer analysis is considered for it. For the modeling, two-phase method is considered to be able to study the nanoparticles concentration as a separate phase. Also it is assumed that peristaltic waves travel along X-axis at a constant speed, c. Furthermore, constant temperatures and constant nanoparticle concentrations are considered for both, left and right walls. This study aims at an analytical solution of the problem by means of least square method (LSM) using the Maple 15.0 mathematical software. Numerical outcomes will be compared. Finally, the effects of most important parameters (Weissenberg number, Prandtl number, Brownian motion parameter, thermophoresis parameter, local temperature and nanoparticle Grashof numbers) on the velocities, temperature and nanoparticles concentration functions are presented. As an important outcome, on the left side of the channel, increasing the Grashof numbers leads to a reduction in velocity profiles, while on the right side, it is the other way around.
Abbasi, F. M., Hayat, T. ., & Ahmad, B. (2016). Numerical analysis for peristalsis of Carreau–Yasuda nanofluid in an asymmetric channel with slip and Joule heating effects. Journal of Engineering Thermophysics, 25(4), 548-562.
Abbasi, F.M., & Saba, S.A. (2017). Shehzad, Heat transfer analysis for peristaltic ﬂow of Carreau-Yasuda ﬂuidthrough a curved channel with radial magnetic ﬁeld, International Journal of Heat and Mass Transfer, 115, 777–783.
Abdul Hakeem, A. K., Ragupathi, P., Saranya, S., & Ganga, B. (2020). Three dimensional non-linear radiative nanofluid flow over a Riga plate." Journal of Applied and Computational Mechanics, 6(4), 1012-1029.
Akinshilo, A., Adeleke Ilegbusi, T., Hafiz, M., Ali, M., & Surajo, A.-J. (2020). Heat transfer analysis of nanofluid flow with porous medium through Jeffery Hamel diverging/converging channel. Journal of Applied and Computational Mechanics, 6(3), 433-444.
Akinshilo, A., Joseph, T., Olofinkua, O., & Olaye, O. (2017). Flow and heat transfer analysis of the Sodium Alginate conveying Copper Nanoparticles between two parallel plates. Journal of applied and computational mechanics, 3(4), 258-266.
Anum, T., Hayat, T., Alsaedi, A., & Ahmad, B. (2017). Numerical simulation for peristalsis of Carreau-Yasuda nanofluid in curved channel with mixed convection and porous space. PloS One, 12(2), e0170029.
Dogonchi, A. S., Chamkha, A. J., Seyyedi, S. M., Hashemi-Tilehnoee, M., & Ganji, D. D. (2019). Viscous dissipation impact on free convection flow of Cu-water nanofluid in a circular enclosure with porosity considering internal heat source. Journal of Applied and Computational Mechanics, 5(4), 717-726.
Hakeem, A. K., Nayak, M. K., & Makinde, O. D. (2019). Effect of exponentially variable viscosity and permeability on Blasius flow of Carreau nano fluid over an electromagnetic plate through a porous medium. Journal of Applied and Computational Mechanics, 5(2), 390-401.
Hamzah, K., Farooq, H., Ali, H., Hatami, M., & Jing, D. (2020). Effect of Two baffles on MHD Natural Convection in U-Shape Superposed by Solid Nanoparticle having Different Shapes. Journal of Applied and Computational Mechanics Articles in Press.
Hatami, M. (2017). Nanoparticles migration around the heated cylinder during the RSM optimization of a wavy-wall enclosure. Advanced Powder Technology, 28(3), 890-899.
Hatami, M., Lijun, S., Dengwei Jing, H., Günerhan, H., & Kameswaran, P.K. (2020). Rotating Cylinder Turbulator Effect on The Heat Transfer of a Nanofluid Flow in a Wavy Divergent Channel. Journal of Applied and Computational Mechanics.
Hatami, M., Mosayebidorcheh, S., & Jing, D. (2017). Two-phase nanofluid condensation and heat transfer modeling using least square method (LSM) for industrial applications. Heat and Mass Transfer, 53(6), 2061-2072.
Hatami, M., Song, D., & Jing, D. (2016). Optimization of a circular-wavy cavity filled by nanofluid under the natural convection heat transfer condition. International Journal of Heat and Mass Transfer, 98, 758-767.
Hatami, M., Zhou, J., Geng, J., & Jing, D. (2018). Variable magnetic field (VMF) effect on the heat transfer of a half-annulus cavity filled by Fe3O4-water nanofluid under constant heat flux. Journal of Magnetism and Magnetic Materials, 451, 173-182.
Hayat, T., Rija Iqbal, A. Tanveer, & Alsaedi, A. (2016). Mixed convective peristaltic transport of Carreau-Yasuda nanofluid in a tapered asymmetric channel. Journal of Molecular Liquids, 223, 1100-1113.
Kefayati, G.H.R. (2013). Effect of a magnetic field on natural convection in an open cavity subjugated to water/alumina nanofluid using Lattice Boltzmann method. International Communications in Heat and Mass Transfer, 40, 67-77.
Khan, A.A., Farooq, A., & Vafai, K. (2018). Impact of induced magnetic ﬁeld on synovial ﬂuid with peristaltic ﬂowin an asymmetric channel, Journal of Magnetism and Magnetic Materials, 446, 54–67.
Khan, M., Amna, S., Malik, M. Y., & Salahuddin, T. (2018). Chemical reaction for Carreau-Yasuda nanofluid flow past a nonlinear stretching foil considering Joule heating. Results in Physics, 8, 1124-1130.
Mohyud-Din, S.T,. & Yildirim, A. (2010). Solutions of tenth and ninth order boundaryvalue problems by modiﬁed variational iteration method. Applications and AppliedMathematics, 5(1), 11-25.
Mosayebidorcheh, S., & Hatami, M. (2017). Heat transfer analysis in carbon nanotube-water between rotating disks under thermal radiation conditions. Journal of Molecular Liquids, 240, 258-267.
Mosayebidorcheh, S., & Hatami, M. (2018a). Analytical investigation of peristaltic nanofluid flow and heat transfer in an asymmetric wavy wall channel (Part I: Straight channel). International Journal of Heat and Mass Transfer, 128, 790-799.
Mosayebidorcheh, S., & Hatami, M. (2018b). Analytical investigation of peristaltic nanofluid flow and heat transfer in an asymmetric wavy wall channel (Part II: Divergent channel). International Journal of Heat and Mass Transfer, 126, 800-808.
Mosayebidorcheh, S., Hatami, M., Mosayebidorcheh, T., & Ganji, D.D. (2015). Optimization analysis of convective–radiative longitudinal ﬁns with temperature-dependent properties and different section shapes and materials, Energy Conversion and Management, 106, 1286–1294.
Mosayebidorcheh, S., Tahavori, M.A., Mosayebidorcheh, T., & Ganji, D.D. (2017). Analysis of nano-bioconvection ﬂow containing both nanoparticles and gyrotactic microorganisms in a horizontal channel using modiﬁed least square method (MLSM), Journal of Molecular Liquids, 227, 356–365.
Najma, A., Shah, N.A., Ahmad, B., Shah, S.I., Ulhaq, S., & Rahimi Gorji, M. (2019). Transient MHD convective flow of fractional nanofluid between vertical plates. Journal of Applied and Computational Mechanics, 5(4), 592-602.
Nisha, S., Rana, P., Kuharat, S., & Beg, O.A. (2020). Non-similar radiative bioconvection nanofluid flow under oblique magnetic field with entropy generation. Journal of Applied and Computational Mechanics.
Tripathi, D., & O. Anwar Bég. (2014). A study on peristaltic flow of nanofluids: Application in drug delivery systems. International Journal of Heat and Mass Transfer, 70, 61-70.